Simpson Strong-Tie SUR2.06/9 - 2 x 9-1/2 Joist Hanger Skewed RightThe SUR/L are 45°-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45° to the right (SUR) and the left (SUL), respectively.
Simpson Strong-Tie SUR2.06/9 - 2 x 9-1/2 Joist Hanger Skewed RightThe SUR/L are 45°-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45° to the right (SUR) and the left (SUL), respectively.
Simpson Strong Tie SUR2.06/11 2-Inch by 11-7/8-Inch Joist Hanger Skewed Right
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Simpson LUS210-2SS Double 2x10 Face Mount Hanger - Stainless Steel
Simpson Strong-Tie THASR Galvanized Adjustable Truss Hanger for 2x9, Skewed Right THASR29 - The Home Depot
Simpson Strong-Tie Single 1-3/4-in x 11-7/8-in 16-Gauge G90 Galvanized Angled Joist Hanger in the Joist Hangers department at
Simpson Strong-Tie ITS Galvanized Top-Flange Joist Hanger for 2 in. x 11-7/8 in. Engineered Wood ITS2.06/11.88 - The Home Depot
Simpson Strong Tie Hangers Framing and Construction Joist Hangers Stainless - Page 18
The HSUR/L are 45-degree skewed hangers designed to support large joist members or double I-joists in wood construction. These heavy U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The HSUR and HSUL hangers are identical except that they are skewed 45-degrees to the right (HSUR) and the left (HSUL), respectively.
Simpson HSUR5.12/11 I-Joist Hanger Skew Right - G90 Galvanized
Simpson Strong-Tie Structural Hardware, Page 61
Construction Connector - Simpson Strong-Tie - Joist Hangers - Building Hardware - The Home Depot
Simpson Strong-Tie Single 2-in x 11-7/8-in 18-Gauge G90 Galvanized Face Mount Joist Hanger in the Joist Hangers department at
The LUS is an easy-to-install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Simpson LUS210-2SS Double 2x10 Face Mount Hanger - Stainless Steel
Simpson Strong-Tie ITS Galvanized Top-Flange Joist Hanger for 2 in. x 11-7/8 in. Engineered Wood ITS2.06/11.88 - The Home Depot
Simpson Strong-Tie Single 2-in x 10-in 16-Gauge Zmax Angled Joist Hanger in the Joist Hangers department at