Simpson Strong-Tie AT3G-10 High Strength Acrylic Adhesive- 10 oz Tubes, 6 tubes/carton
Simpson Strong-Tie SET-XP56 - 56oz. Cartridge SET-XP Anchoring Adhesive : Automotive
Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly this low-odor formula is a dark teal color for easy post-installation identification.
Simpson Strong-Tie AT-XP13 - Fast-Curing Acrylic Anchoring Adhesive 12.5oz
Simpson Strong-Tie, SET-XP10, 8.5oz Tube w/ Nozzle, Epoxy Anchoring Adhesive
Exceptional performance superior bond strengths permit ductile solutions in high seismic areas Recognized per ICC-ES AC308 for post-installed rebar
Simpson Strong-Tie SET3G10 - High-Strength Epoxy Adhesive - 8.5oz Tube w/ Nozzle
Simpson Strong Tie-CIGV3KT, Structural Injection Epoxy, 3 Gallon Bulk Kit (1/Pkg)
SET-3G is an epoxy-based anchoring adhesive with high design strength and proven performance. The adhesive is a 1:1 ratio, two-component, anchoring adhesive formulated for anchoring threaded rod and rebar into concrete (cracked and uncracked). This low-odor adhesive is a uniform gray color when mixed properly and has a substrate installation temperature range from 40F (4C) to 100F (38C).
Simpson Strong-Tie SET-3G High-Strength Epoxy Adhesive w/Nozzle 22oz
The E-Z-Click injection system is composed of a specially designed fitting and ports that take the mess out of your repair project while allowing you to work faster. The E-Z-Click injection fitting installs onto the end of the Optimix mixing nozzle and clicks onto the E-Z-Click ports during injection. Key Features Positive connection eliminates messy leakage, minimizing waste and clean-up. No drilling of ports: E-Z-Click ports perform while pasted to the surface of the concrete.
Simpson Strong-Tie EIF-EZ - E-Z-Click Epoxy Injection Port Fitting Hose 10 Pk
Simpson Strong-Tie EDTA22CKT Battery Powered Dispensing Tool for 22 oz. cartridges
Simpson Strong-Tie SET-XP10 Epoxy Anchoring Adhesive 8.5oz Tube w/ Nozzle SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.
Simpson Strong Tie SET-XP10 Epoxy Adhesive - 8.5 fl oz tube
Simpson Strong-Tie® ETIPAC10KT Injection Epoxy Kit
Simpson Strong-Tie SET-XP 22-oz. High-Strength Epoxy Adhesive Cartridge with Nozzle SET-XP22-N - The Home Depot